Product Reviews

SmallRig 1138 Super Camera Clamp Review

A flexible clamp mount for creators attaching a compact camera, monitor, light, or microphone to a rod, tube, table, or frame.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

This SmallRig 1138 camera clamp review looks at a compact mounting option for creators who need to attach a camera or accessory to nearby support surfaces.

Its double ball head, clamp, standard 1/4-inch screw, and included action camera adapter make it adaptable, while the 1.5 kg maximum load calls for sensible equipment matching.

SmallRig 1138 Clamp Review Summary

The quick verdict

SmallRig 1138 Super Camera Clamp
4.6/5

8,000+ ratings

Read Amazon Reviews

SmallRig 1138 Super Camera Clamp

A flexible clamp mount for creators attaching a compact camera, monitor, light, or microphone to a rod, tube, table, or frame.

  • Double ball head design pairs an adjustable accessory position with a clamp base.
  • Includes a 1/4-inch-20 screw for cameras, webcams, monitors, lights, microphones, action cameras, and other compatible gear.
  • Clamp can attach to rods, tubes, tables, frames, or tripods without drilling.
  • Includes an action camera mount adapter for compatible action-camera setups.

Pros

  • Combines a clamping base and adjustable double ball head in one mount.
  • Works with common 1/4-inch-20 accessory connections and includes an action camera adapter.

Consider before buying

  • The 1.5 kg maximum capacity rules it out for heavier camera and accessory combinations.
  • For moving or dynamic setups, a separate safety rope is recommended, adding a step to rigging.
Read the full review summary

The SmallRig 1138 combines a clamping base with a double ball head and 1/4-inch-20 screw, letting it support a range of small production accessories without drilling into a desk, rod, tube, frame, or tripod.

The included action camera adapter adds another mounting route, and its aluminum and stainless steel construction keeps the assembly relatively compact at about 0.2 kg.

Its strongest appeal is flexibility in small setups: a creator can secure the clamp to a convenient support and adjust the mounted accessory's position.

The 1.5 kg maximum capacity is the main planning limit, and the product specifically advises using a safety rope in dynamic situations.

It suits lightweight rigs and controlled workspaces better than situations where substantial loads or vigorous movement are central.

The buying factors

SmallRig 1138 Clamp Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Mounting versatility

The clamp and 1/4-inch-20 screw accommodate multiple camera and accessory types, with an action camera adapter included.

8/10

Positioning flexibility

A double ball head is useful when a fixed surface needs to support an accessory at an adjustable angle.

6/10

Load range

The stated maximum capacity of 1.5 kg is suitable for relatively light equipment, but limits heavier setups.

8/10

Material choice

Aluminum and stainless steel offer a substantial metal construction in a compact mount.

8/10

Setup convenience

The clamp attaches to common supports without drilling, giving it practical use at a desk or on a rod or frame.

5/10

Dynamic use suitability

The guidance to add a safety rope in dynamic situations makes extra securing an important part of mobile setups.

Key Features and Specifications of SmallRig 1138 Clamp

  • Double ball head design pairs an adjustable accessory position with a clamp base.
  • Includes a 1/4-inch-20 screw for cameras, webcams, monitors, lights, microphones, action cameras, and other compatible gear.
  • Clamp can attach to rods, tubes, tables, frames, or tripods without drilling.
  • Includes an action camera mount adapter for compatible action-camera setups.
  • Aluminum and stainless steel construction; listed item weight is about 0.2 kg.
  • Maximum supported load is 1.5 kg; the product recommends a safety rope for dynamic use.

Pros and Cons of SmallRig 1138 Clamp

Pros

  • Combines a clamping base and adjustable double ball head in one mount.
  • Works with common 1/4-inch-20 accessory connections and includes an action camera adapter.
  • Can be attached to several types of supports without permanent installation.
  • Metal construction makes it a practical piece of reusable rigging hardware.

Consider before buying

  • The 1.5 kg maximum capacity rules it out for heavier camera and accessory combinations.
  • For moving or dynamic setups, a separate safety rope is recommended, adding a step to rigging.
  • Before buying, check that the clamp's opening and the support's shape suit the specific surface you plan to use.

Who Should Buy SmallRig 1138 Clamp?

Good fit

Consider the SmallRig 1138 if you want to mount a compact camera or accessory to a desk, rod, tube, frame, or tripod and need some freedom to aim it.

The double ball head and 1/4-inch-20 screw make it useful across several common small-rig tasks, while the included action camera adapter broadens its fit for compatible cameras.

It is especially worth considering for a home creator setup, a stationary production station, or an occasional mounting job where drilling a dedicated fixture is undesirable.

Keep the complete mounted load under the stated 1.5 kg maximum and check that the support surface is suitable before tightening the clamp.

For a moving setup, plan around the safety-rope guidance and secure the camera independently where practical. That extra restraint is relevant when the support or rig may shift, even if the accessory itself is light.

Who should skip it

Skip this clamp if your planned camera and accessories together exceed 1.5 kg, or if your setup depends on a permanent, purpose-built mount.

For use around vehicles, bikes, or other moving equipment, choose it only if you can add the recommended safety rope and confirm the clamp is firmly attached to the support.

How the SmallRig 1138 Clamp Fits a Compact Rig

A clamp that replaces a fixed mounting point

The 1138's practical advantage is that it can attach to more than one kind of support, including a table, frame, rod, tube, or tripod.

That suits creators who move a small camera or accessory between work areas, since they can use an existing edge or bar as the mounting point instead of drilling.

Check the dimensions and shape of the actual support before relying on it; the product information does not specify a jaw opening range.

Ball-head adjustment for camera accessories

A double ball head gives the mounted accessory room to change angle after the clamp is in place. This can help position a small monitor, light, microphone, or camera where a straight fixed connection would be awkward.

The 1/4-inch-20 connection is broadly useful, but the accessory and any intervening adapter still need to be compatible with that interface.

Respect the payload and movement limits

The stated maximum load is 1.5 kg, which gives buyers a clear ceiling for choosing a device and any attached hardware.

Weigh the full combination rather than only the camera, and leave margin for the leverage created by an extended or angled setup. In dynamic situations, the product's safety-rope guidance should inform how the mount is secured.

Material and included adapter

Aluminum and stainless steel form the main structure, and the package also includes an action camera adapter. That mix makes the clamp useful for both standard 1/4-inch-20 accessories and compatible action-camera mounting arrangements.

Confirm the action camera's connection style and the intended support before assembling the rig.

Alternatives to SmallRig 1138 Clamp

Camera Mounts & Clamps alternative

SmallRig 2732 9.8-Inch Magic Arm Clamp Kit
4.6/5

3,000+ ratings

Read Amazon Reviews

SmallRig 2732 9.8-Inch Magic Arm Clamp Kit

Choose the 2732 if the longer arm and its additional clamp thread options suit your rig. The 1138 is a more direct fit when you want a clamp-mounted double ball head and the included action camera adapter.

  • The SmallRig 2732 kit adds a 9.8-inch articulating arm between its clamp and accessory.
  • It includes 1/4-inch and 3/8-inch clamp threads, has a clamp opening range of 15 to 54 mm, and uses 1/4-inch screws at both arm ends.
  • The SmallRig 1138 attaches its double ball head directly to a clamp and includes an action camera adapter; its maximum load is 1.5 kg.

Camera Mounts & Clamps alternative

SmallRig 4103 Double Clamp Mount
4.6/5

800+ ratings

Read Amazon Reviews

SmallRig 4103 Double Clamp Mount

The 4103 is worth considering when you need to join two supports and the larger stated load range matches your equipment.

The 1138 is the simpler option for a single support point and a lighter accessory, particularly when its action camera adapter is useful.

  • The SmallRig 4103 uses two clamps, supports rods from 14 to 60 mm in diameter, and has a stated maximum load of 3.5 kg.
  • Its double ball head supports 360-degree adjustment.
  • The SmallRig 1138 is a single clamp mount with a 1.5 kg maximum load and a 1/4-inch-20 accessory screw.

Is SmallRig 1138 Clamp Worth It?

The SmallRig 1138 Super Camera Clamp is worth considering for compact camera rigs that need a movable mounting point and flexible accessory positioning.

Its included action camera adapter, common 1/4-inch-20 connection, and support-surface versatility make it useful for desk and small production setups.

Buy it if your complete mounted equipment stays within 1.5 kg and you can secure the clamp appropriately.

For dynamic use, account for the recommended safety rope; for heavier gear or a need to clamp two supports, compare other mounting designs before choosing.

Your review at a glance

SmallRig 1138 Super Camera Clamp
4.6/5

8,000+ ratings

Read Amazon Reviews

SmallRig 1138 Super Camera Clamp

A flexible clamp mount for creators attaching a compact camera, monitor, light, or microphone to a rod, tube, table, or frame.

  • Double ball head design pairs an adjustable accessory position with a clamp base.
  • Includes a 1/4-inch-20 screw for cameras, webcams, monitors, lights, microphones, action cameras, and other compatible gear.
  • Clamp can attach to rods, tubes, tables, frames, or tripods without drilling.
  • Includes an action camera mount adapter for compatible action-camera setups.

Written by

brianboruportland.com Editorial Team

Editorial team

brianboruportland.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig 1138 Super Camera Clamp

SmallRig 1138 Super Camera Clamp

A flexible clamp mount for creators attaching a compact camera, monitor, light, or microphone to a rod, tube, table, or frame.

  • Double ball head design pairs an adjustable accessory position with a clamp base.
  • Includes a 1/4-inch-20 screw for cameras, webcams, monitors, lights, microphones, action cameras, and other compatible gear.
Check Video Reviews on Amazon